Fujikura 90S+ Splicer

Core Alignment Fusion Splicer

The 90S+ is a single fiber core alignment fusion splicer setting a new standard in the market for fusion splicing. The 90S+ is packed with a whole host of new and enhanced features specifically developed with the objective of enabling the user to work faster with higher precision.

Overall splice process time has been significantly reduced since the previous model (70S+). This has been achieved with a combination of improvements to the reaction time of the automated wind protectors and automated heater, new fiber retention clamps, improved universal sheath clamps and a redesigned internal structure that matches the protection sleeve to the fusion splice point which enables splicing to be achieved without the need of the user to touch the 90S+ once the process has started.

Item		Specification
Fibre alignment method		Active core alignment
Fibre count can be spliced		Single fibre
Applicable fibre	Fibre type	Single mode optical fibre
	Fibre type	Multi mode optical fibre
	Cladding dia.	80 to 150μm
Applicable coating	Sheath clamp	Coating dia.: Max. 3,000μm
Applicable coating	Sheath clamp	Cleave length: 5 to 16mm *1
Fibre splice performance	Splice loss *2	ITU-T G.652: Avg. 0.02dB
		ITU-T G.651: Avg. 0.01dB
		ITU-T G.653: Avg. 0.04dB
		ITU-T G.655: Avg. 0.04dB
		ITU-T G.657: Avg. 0.02dB
	Splice time *3	SM FAST mode: Avg. 7 to 9sec.
	Splice time *3	AUTO mode: Avg. 14 to 16sec.
Applicable protection sleeve	Sleeve type	Heat shrinkable sleeve
	Sleeve length	Max. 66mm
	Sleeve dia.	Max. 6.0mm before shrinking
Sleeve heat performance	Heat time *4	60mm slim mode: Avg. 9 to 10sec.
Sleeve heat performance	Heat time *4	60mm mode: Avg. 13 to 15sec.
Fibre tensile test force		Approx. 2.0N
Electrode life *5		Approx. 5,000 splices
Physical description	Dimensions W	Approx. 170mm without projection
	Dimensions D	Approx. 173mm without projection
	Dimensions H	Approx. 150mm without projection
	Weight	Approx. 2.8kg including battery
Environmental condition	Temperature	Operate: -10 to 50 °C / Storage: -40 to 80 °C
	Humidity	Operate: 0 to 95%RH non-condensing / Storage: 0 to 95%RH non-condensing
	Altitude	Max. 5,000m
AC adaptor	Input	AC100 to 240V, 50/60Hz, Max. 1.5A
Battery pack	Type	Rechargeable Lithium Ion
	Output	Approx. DC14.4V / 6,380mAh
	Capacity *6	Approx. 300 splice and heat cycles
	Temperature	Recharge: 0 to 30 °C / Storage: -20 to 30 °C
	Battery life *7	Approx. 500 recharge cycles
Display	LCD monitor	TFT 5 inches with touch screen
Display	Magnification	200 to 320x
Illumination	V-grooves	LED lamp
Data storage	Splice mode	100 splice modes
	Heat mode	30 heat modes
	Splice result	20,000 splices
	Splice image	100 images
Notes 1: Cleave length range depending on fibre type: 5 to 16mm: 125μm cladding dia. / 250μm coating dia. 10 to 16mm: 125μm cladding dia. / 400 or 900μm coating dia. 2: Measured with a cut-back method relevant to ITU-T and IEC standard after splicing Fujikura identical fibres. The average splice loss changes depending on the environmental condition and fibre characteristics. 3: Measured at room temperature. The definition of splice time is from the fibre image appeared in LCD monitor to the estimated loss displayed. The average splice time changes depending on the environmental conditions, fibre type, and fibre characteristics. 4: Measured at room temperature with the AC adapter. The heat time is defined from the start beep sound to the finish beep sound. The average heat time changes depending on the environmental conditions, sleeve type and battery pack condition. 5: The electrode life changes depending on the environmental conditions, fibre type and splice modes. 6: Test condition (1) Splice and heat time: 2 minutes cycle (2) Using the splicer power save settings (3) Using a not degraded battery (4) At room temperature The battery capacity changes when testing with different conditions from the above. *7: The battery capacity decreases to a half after approx. 500 discharge and recharge cycles, The battery life is shortened further when using outside of the storage temperature range, operating temperature range, if completely discharged by storing for a long time without recharging.

Market leading high precision and accurate core alignment technology with advanced image processing technology
Improved automatic wind protector design which reduces overall splice time but can also be used in manual style
High capacity lithium-ion battery (up to 300 splices)
Patented easy splice protector positioning system
Universal sheath clamps for standard 250 um fibre but also 900 um loose tube fibre types.
Fibre Retention clamps
Enabled with Fujikura’s unique “Active Blade Management Technology” with new capability to link up to 2 CT50 cleavers simultaneously.
A completely redesigned multi-function carry case and workstation
Tool-less replaceable electrodes
Touch screen