The 22S is designed for high-end FTTH splicer applications in FTTX, Data Center / LAN and Access Networks. The 22S offers an active V-Groove alignment single fibre splicer for reliable and improved splicing performance for a range of different fibres; SMF, MMF, DSF, NZDSF.
Applicable from 125μm cladding diameter/up to 3mm sheath diameter fibres with sheath clamp. The 22S provides advanced capabilities; including splice result storage of 200 splices, 5-16mm short cleave length splicing. Quick splicing time is produced in 9 seconds (single mode fibre) and an automated tube-heating time of 24 seconds (single mode 60mm).
22S Kit with CT-06A Cleaver
Item | Description | Image |
---|---|---|
22S | Fusion splicer | |
CT-06A | Precision Cleaver | |
ADC-19 | AC adapter | |
BTR-11 | Battery | |
ACC-SA | AC power cord | |
CC-32 | Carrying case | |
ELCT2 -12 | Spare electrodes (1 pair) | |
M-22 | Instruction manual & PC software CD | |
CLAMP S21A | Fibre Clamp (pair) | |
USB-1 | USB cable | |
AP-01 | Alcoholpot (1 pc) | |
SC-01 | Screw driver (1 pc) |
22S Kit C Combo Kit with AFL FLX380
- Fujikura’s FTTH splicer combined with AFL PON / FTTx OTDR
- Ideal for FTTH installations by testing 1310/1550/1625nm
Item | Description | Image |
---|---|---|
22S | Fusion splicer | |
CT-06A | Precision Cleaver | |
FLX380-303-LM | AFL FLX380 OTDR | |
ADC-19 | AC adapter | |
BTR-11 | Battery | |
ACC-SA | AC power cord | |
CC-29 | Carrying case | |
ELCT2 -12 | Spare electrodes (1 pair) | |
M-22 | Instruction manual & PC software CD | |
CLAMP S21A | Fibre Clamp (pair) | |
USB-1 | USB cable | |
AP-01 | Alcoholpot (1 pc) | |
SC-01 | Screw driver (1 pc) |
Specifications | Description |
---|---|
Applicable fibres | Single-mode / SMF (G.652 & G.657), Multimode / MMF (G.651), DSF (G.653), NZDSF (G.655) |
Cladding diameter | 125µm / 100µm to 3mm with sheath clamp |
Cleave length | 5mm to 16mm |
Splice mode / heating mode | Total 100 splice modes / 30 heating modes |
Splice loss | 0.03 dB (SM), 0.01 dB (MM), 0.05 dB (DS) and 0.05 dB (NZDS). Measured by cut-back method relevant to ITU-T and IEC standards |
Splice time / tube heating time | Typical 7sec with SM / Typical 24sec with FP-03 (60mm) sleeve |
Splice result storage | Last 10,000 splices |
Viewing methods / magnification | 4.73″ TFT colour LCD. 2 axis CMOS camera. 132x magnification. 200x magnification after splicing |
Tension test | 1.96N to 2.25N |
Applicable protection sleeve | 60mm, 40mm and Fujikura micro sleeves |
No. of splice / heating per battery full charge* | Typical 200 cycles with BTR-11 |
Electrode life | 5,000 splices |
Size / weight | 120w x 189d x 72h (mm) / 1.14kg (including battery) |
Operating condition | Altitude: 0 to 3,660m above sea level. Wind: max. wind velocity of 15m/s. Temperature: -10 to 50°C, Humidity: 0 to 95%RH, non-dew |
Resistance features** | Shock resistance: 76cm (30inch) bottom surface drop. Dust resistance: exposure to dust (0.1 to 500µm dia. Alumina Silicate) Rain resistance: H=10mm/hr for 10min |
Other features | PC software upgrade / data management |
* one (1) splicing and heating cycle per two (2) min. under room temperature condition.
** Carried out in Fujikura labs in Japan. The shock, dust and rain resistance tests do not guarantee that the product will not be damaged under these conditions.
Description | Model No. |
---|---|
High precision single fibre cleaver | CT-06 (for single fibre) |
High precision fibre cleaver | CT-30 (for single to 12 ribbon fibres) |
Primary coat stripper | PS-02 |
Nylon jacket stripper | JS-01 |
Protection sleeve | FP-03 / 03 (L=40) and FPS01 series |
Description | Model No. | Set |
---|---|---|
Fibre Holder | FH-60-250 (coating dia 250µm) | 1 pair |
FH-60-900 (coating dia 900µm) | 1 pair | |
FH-60-DC250 (coating dia 250µm in drop cable) | 1 pair | |
TH-60-IDC250 (1.6mm x 2mm drop cable) cord | ||
FH-FC-20 (coating dia 900µm in 2.0mm sheath dia) | 1 pc. | |
FH-FC-30 (coating dia 900µm in 3.0mm sheath dia) | 1 pc. | |
FH-60-LT900 (900µm dia. loose buffer fibre) | 2 pcs | |
Sheath Clamp | CLAMP-S21A (inc. in standard package) | 1 pair |
CLAMP-S21B (900µm dia. loose buffer fibre) | 1 pair | |
Battery Pack | BTR-11 (Li-ion) | 1 pc. |
Electrodes | ELCT2-20A | 1 pair |
Transfer Clamp | CLAMP-DC-12 (transfer drop cable to heater) | |
Screw mount for tripod | TS-01 |